● 1200Mbps high speed and NAT high conversion rate

　　XD1202G adopts 802.11ac, WAVE2 technology, which can provide wireless access speed up to 1200Mbps, which is more than 10 times that of 802.11/b/g/n products in the same environment, and the conversion rate of NAT is > 93%, enabling download through the external network Upload faster and surf the web as you like.

　　● Transparent and energy efficient

　　The product supports IEEE802.3az, which enables a transceiver that has no frame to send to enter a low-power mode. When a new frame arrives, the transceiver will return to the active mode within a few microseconds, thus enabling the protocol The upper level is almost transparent for energy saving. It can automatically adjust energy consumption according to the actual flow of the port, and can quickly switch between full-speed operation and low-power idle mode, saving users 30% of power consumption and greatly saving operating costs.

　　● Beamforming technology

　　Through the wave velocity shaping technology, when the interference direction is unknown, the signal weight value of each array element in the array can be automatically adjusted, so that the zero point of the antenna pattern is aligned with the interference direction to suppress the interference, enhance the detection ability of the system's useful signals, optimize the Antenna pattern, and can effectively track useful signals, suppress and eliminate interference and noise, and successfully suppress interference even in the case of multiple interferences and signals of the same frequency distributed in a short distance.

　　● Linear power manual adjustment

　　The transmit power of high-power APs can be adjusted linearly, and the transmit power of high-power APs can be adjusted reasonably according to the actual environment. In bars/KTV leisure center halls and other environments with high traffic flow and high AP density, the transmit power of high-power APs can be reduced to reduce mutual interference between APs and improve wireless quality; in industrial parks, where AP density is low and the building layout is relatively complex The environment can improve the transmit power of high-power APs and improve the coverage effect.